MÁY ĐO TỐC ĐỘ VÒNG QUAY TIẾP XÚC ĐIỆN TỬ CẦM TAY TESTO 470 piqi1

13.216.000₫

MÁY ĐO TỐC ĐỘ VÒNG QUAY TIẾP XÚC ĐIỆN TỬ CẦM TAY TESTO 470 piqi1

13.216.000₫

Mô tả

Version:

Non-contact measurement by reflector strip, contact measuring by means of mechanical adapter tip, memory selectable using MODE button for maximum value, minimum value, or most recent value. Switches off automatically 30 seconds after the last key action.

Application:

Rotational speed measurement:

– optically 1 to 99,999 rpm non-contact,– mechanically 0. 1 to 19,999 rpm with contact tip. Speed measurement (with measuring wheel). – 0. 10 to 1999 m/minLength measurement (with measuring wheel). – 0.

02 bis 99999 m Supplied with:

Includes mechanical adapter, measuring wheel (0. 1 m) No. 471180,hollow measuring tip No. 471190, drive cone centre No. 471170,measuring wheel (6 inch), reflector strips No. 471150,case, 2 batteries No. 081561 size LR6.

Thông tin

Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “MÁY ĐO TỐC ĐỘ VÒNG QUAY TIẾP XÚC ĐIỆN TỬ CẦM TAY TESTO 470 piqi1”

Sản phẩm tương tự

GAUGE BLOCK SET 32PCS CLASS 1 piqi1

5.571.000₫

GAUGE BLOCK SET 32PCS CLASS 1 piqi1

Version:

Made of aged special steel. Hardened (HRC 64 − 66) with slightly bevelled edges. Lapped gauge faces.

With free test certificate traceable to national standards:

Each gauge block is provided with its own unique identity number. The actual deviation from the nominal dimensions is recorded in the test certificate. The absolute actual dimension is therefore known. Tolerance class 1 for checking standards and gauges.

Content:

1 pc.

each of size:

1. 000; 1. 005; 50 mmGraduation 0.

01:

10 pcs. 1. 01 − 1. 10 mmGraduation 0.

1:

9 pcs. 1. 20 − 2. 0 mmGraduation 1.

0:

8 pcs. 3. 0 − 10 mmGraduation 10.

0:

2 pcs. 20 − 30 mm

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 150-175MM piqi1

82.587.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 150-175MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 100-125MM piqi1

71.252.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 100-125MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 10-12MM piqi1

50.200.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 10-12MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.

DƯỠNG KIỂM LỖ D37H7 HOFFMANN 484000 37 piqi1

1.778.000₫

DƯỠNG KIỂM LỖ D37H7 HOFFMANN 484000 37 piqi1

Version:

The “Go” ends of these working gauges have a wear allowance to DIN 7164. Measuring body made of first class gauge steel, hardened, stress-relieved, ground, and lapped. Plug gauge with tolerance class H7.

Standard:

Tolerance and dimensions to DIN EN ISO 1938-1, DIN 2245-1 and DIN 7164.

Note:

Further intermediate sizes available on request or can simply be ordered at www. hoffmann-group. com, for instance No. 484000 size 82. For acceptance gauges (without wear allowance) see No. 484027; 484028. For gauges with intermediate sizes and all ⌀ with numeric tolerances see No. 484025; 484026.

THƯỚC LÁ DÀI 300M HOLEX 461800 300 piqi1

49.000₫

THƯỚC LÁ DÀI 300M HOLEX 461800 300 piqi1

Version:

Made of stainless spring steel. Clean, electrolytically applied, black graduations and figures with smooth surface. Easy to read. Rounded edges to prevent injuries. Upper edge with ½ mm graduations, lower edge with 1 mm graduations.

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 70-85MM piqi1

58.991.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 70-85MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 8-10MM piqi1

49.969.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 8-10MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.