MÁY ĐO TỐC ĐỘ VÒNG QUAY TIẾP XÚC CẦM TAY RHEINTACHO 471010 HTM100M piqi1

26.258.300₫

MÁY ĐO TỐC ĐỘ VÒNG QUAY TIẾP XÚC CẦM TAY RHEINTACHO 471010 HTM100M piqi1

26.258.300₫

Mô tả

Version:

Mechanical hand-held tachometer for measuring rotational speeds and surface speeds in various fields of application. Large easy-to-read display with button for point lock to save last reading. Requires no batteries.

Application:

Rotational speed measurement:

10 − 10,000 rpm,Speed:

1 − 1000 m/min.

Supplied with:

Including surface disc (0. 1 m) No. 471180, drive cone centre No. 471170, drive socket centre No. 471190, extension.

Note:

ATEX certified variants on request:

tachometers for use in environments with potentially explosive atmospheres. Certified for ATEX zones 1 and 2.

Thông tin

Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “MÁY ĐO TỐC ĐỘ VÒNG QUAY TIẾP XÚC CẦM TAY RHEINTACHO 471010 HTM100M piqi1”

Sản phẩm tương tự

THƯỚC LÁ DÀI 300M HOLEX 461800 300 piqi1

49.000₫

THƯỚC LÁ DÀI 300M HOLEX 461800 300 piqi1

Version:

Made of stainless spring steel. Clean, electrolytically applied, black graduations and figures with smooth surface. Easy to read. Rounded edges to prevent injuries. Upper edge with ½ mm graduations, lower edge with 1 mm graduations.

THƯỚC CẶP ĐIỆN TỬ MAHR 300MM, IP67, I-WI 412738 300 piqi1

15.500.000₫

THƯỚC CẶP ĐIỆN TỬ MAHR 300MM, IP67, I-WI 412738 300 piqi1

Version:

Very large LCD display with 11 mm character height. Integral i-wi wireless data interface. Resistant to dust and moisture. Service life approx. 3 years.

Function:

IP67:

Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

i-wi radio receiver No. 498912.

ĐỒNG HỒ VẠN NĂNG MM1-3 BENNING piqi1

4.398.000₫

ĐỒNG HỒ VẠN NĂNG MM1-3 BENNING piqi1

  • Đồng hồ vạn năng vỏ được làm bằng nhựa, mặt đồng hồ LCD loại lớn.
  • Đồng hồ có thể đo được nhiều đại lượng khác nhau trong ngành điện.
  • Tiêu chuẩn: IEC / DIN EN 061010-1 (DIN VDE 0411-1).
  • sản phẩm kèm theo: Pin, đầu dò, hộp bảo vệ nhỏ gọn, hướng dẫn vận hành.
  • Cảm biến nhiệt độ dây.
  • Thiết bị treo cao su

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 60-70MM piqi1

58.528.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 60-70MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.

DƯỠNG KIỂM LỖ D37H7 HOFFMANN 484000 37 piqi1

1.778.000₫

DƯỠNG KIỂM LỖ D37H7 HOFFMANN 484000 37 piqi1

Version:

The “Go” ends of these working gauges have a wear allowance to DIN 7164. Measuring body made of first class gauge steel, hardened, stress-relieved, ground, and lapped. Plug gauge with tolerance class H7.

Standard:

Tolerance and dimensions to DIN EN ISO 1938-1, DIN 2245-1 and DIN 7164.

Note:

Further intermediate sizes available on request or can simply be ordered at www. hoffmann-group. com, for instance No. 484000 size 82. For acceptance gauges (without wear allowance) see No. 484027; 484028. For gauges with intermediate sizes and all ⌀ with numeric tolerances see No. 484025; 484026.

GAUGE BLOCK SET 32PCS CLASS 1 piqi1

5.571.000₫

GAUGE BLOCK SET 32PCS CLASS 1 piqi1

Version:

Made of aged special steel. Hardened (HRC 64 − 66) with slightly bevelled edges. Lapped gauge faces.

With free test certificate traceable to national standards:

Each gauge block is provided with its own unique identity number. The actual deviation from the nominal dimensions is recorded in the test certificate. The absolute actual dimension is therefore known. Tolerance class 1 for checking standards and gauges.

Content:

1 pc.

each of size:

1. 000; 1. 005; 50 mmGraduation 0.

01:

10 pcs. 1. 01 − 1. 10 mmGraduation 0.

1:

9 pcs. 1. 20 − 2. 0 mmGraduation 1.

0:

8 pcs. 3. 0 − 10 mmGraduation 10.

0:

2 pcs. 20 − 30 mm

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 20-25MM piqi1

52.745.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 20-25MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 50-60MM piqi1

57.835.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 50-60MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.