ĐẾ TỪ TÍNH CHO CHÂN GÁ ĐỒNG HỒ SO HOLEX 442140 3 piqi1

565.000₫

ĐẾ TỪ TÍNH CHO CHÂN GÁ ĐỒNG HỒ SO HOLEX 442140 3 piqi1

565.000₫

Mô tả

Version:

Permanent-magnet base with Vee sole and rotary switch. Magnetic force acts through Vee and flat underside as well as the flat back of the base. Adheres to all flat and cylindrical surfaces. Powerful attachment magnet with Vee sole. Switching by rotary handle.

Suitable for:

Jointed arms No. 442110 and 442114.

Thông tin

Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “ĐẾ TỪ TÍNH CHO CHÂN GÁ ĐỒNG HỒ SO HOLEX 442140 3 piqi1”

Sản phẩm tương tự

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 25-30MM piqi1

52.976.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 25-30MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.

THƯỚC LÁ DÀI 200M HOLEX 461800 200 piqi1

39.000₫

THƯỚC LÁ DÀI 200M HOLEX 461800 200 piqi1

Version:

Made of stainless spring steel. Clean, electrolytically applied, black graduations and figures with smooth surface. Easy to read. Rounded edges to prevent injuries. Upper edge with ½ mm graduations, lower edge with 1 mm graduations.

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 8-10MM piqi1

49.969.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 8-10MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.

DƯỠNG KIỂM LỖ D37H7 HOFFMANN 484000 37 piqi1

1.778.000₫

DƯỠNG KIỂM LỖ D37H7 HOFFMANN 484000 37 piqi1

Version:

The “Go” ends of these working gauges have a wear allowance to DIN 7164. Measuring body made of first class gauge steel, hardened, stress-relieved, ground, and lapped. Plug gauge with tolerance class H7.

Standard:

Tolerance and dimensions to DIN EN ISO 1938-1, DIN 2245-1 and DIN 7164.

Note:

Further intermediate sizes available on request or can simply be ordered at www. hoffmann-group. com, for instance No. 484000 size 82. For acceptance gauges (without wear allowance) see No. 484027; 484028. For gauges with intermediate sizes and all ⌀ with numeric tolerances see No. 484025; 484026.

THƯỚC CẶP ĐIỆN TỬ MAHR 300MM, IP67, I-WI 412738 300 piqi1

15.500.000₫

THƯỚC CẶP ĐIỆN TỬ MAHR 300MM, IP67, I-WI 412738 300 piqi1

Version:

Very large LCD display with 11 mm character height. Integral i-wi wireless data interface. Resistant to dust and moisture. Service life approx. 3 years.

Function:

IP67:

Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

i-wi radio receiver No. 498912.

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 70-85MM piqi1

58.991.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 70-85MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 125-150MM piqi1

78.192.000₫

PANME ĐIỆN TỬ 3 ĐIỂM MAHR, IP52 428930 125-150MM piqi1

Version:

Simple direct reading on the high-contrast display. Immediately ready for use due to Reference System. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head, from 12 mm with carbide jaws. From 40 mm the micrometer head is of aluminium, to save weight. From 12 mm for measuring down to the bottom of the hole.

Function:

IP52:

Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Supplied with:

1 battery No.

081560 size CR2032 Optional extras:

Extension No. 428950, data cable No. 498940, setting rings No. 484030.

THƯỚC LÁ THẲNG 500MM GARANT 461770 500 piqi1

299.000₫

THƯỚC LÁ THẲNG 500MM GARANT 461770 500 piqi1

  • Được làm từ thép lò xo không rỉ
  • Bề mặt mịn và độ tương phản cao giúp nhìn rõ cách vạch đo trên thước
  • Mặt trên với đơn vị đo 0.5mm, mặt dưới 1mm
  • Chiều dài 500mm
  • Rộng 18mm
  • Dày 0.5mm